功能介绍

一款只要一扔就能逃生的灭火器，夜间行走智能感应无惧黑暗

照明持续30秒，热成像感应

浓烟滚滚为你指引方向

美观/方便/体积小/体重轻

采用树脂材料/不易碎/快速灭火/不复燃/

功率小赠送3节电池告别插座烦恼

远离火源，本能投掷，轻松打开逃生出口

A类火：固体有机物，木材    B类火：液体，可溶固体，汽油，蜡

C类火：气体   D类火：金属    E类火：带电

我们的产品主要是灭A/B/C/E类火

System fire extinguishing method: fully submerged

Maximum single area protection area: 500㎡

System nominal working pressure (20 ℃): 4.2MPa

Maximum working pressure of the system: 5.3MPa

Maximum filling density of fire extinguishing agent: ≤950kg / ㎡

Filling pressure of starting bottle (20 ℃): 6.0MPa

The system has a delay start function: delay 30S

Fire extinguishing agent spray time: ≤10S

Working environment temperature of fire extinguishing system: 0 ℃ ~ + 50 ℃

System startup mode: automatic, electrical manual, mechanical application manual operation

System automatic power: DC24V ± 3V, 1.1A

Bottle group specifications: 40L, 90L, 120L, 150L

Basic parameters:

System fire extinguishing method: fully submerged

Maximum single area protection area: 500㎡

System nominal working pressure (20 ℃): 2.5MPa

Maximum working pressure of the system: 4.2MPa

Maximum filling density of fire extinguishing agent: ≤950kg / ㎡

The system has a delay start function: delay 30S

Fire extinguishing agent spray time: ≤10S

Working environment temperature of fire extinguishing system: 0 ℃ ~ + 50 ℃

System startup mode: automatic, electrical manual, manual operation for mechanical applications

System automatic power: DC24V ± 3V, 1.1A

Bottle group specifications: 70L, 90L, 120L

Scope of application

This cabinet type device does not need to set a dedicated bottle group. The entire cabinet is set in a protective area. It is suitable for small protective areas such as computer rooms, archives, valuables storage, and communication room. Several cabinet type devices are used in combination. It also protects larger protective areas. This device can be used when a dedicated bottle group cannot be set in the building, or there is a bottle group, but the transportation distance is too long to meet the requirements of engineering design, or it is inconvenient to install the system pipe network in the protective area.

Device composition

How to use the device  

● After the installation of the device is completed, it can be put into use only after it has passed the inspection by the relevant department.

● The device can be started in three modes: automatic control, manual control and mechanical emergency manual control. In general, manual control should be used, and it can be converted to automatic control when there is no one in the protection zone. When automatic control and manual control cannot be performed, mechanical emergency manual control should be used.

● Automatic control: Turn the control mode selection key on the control panel to the "Auto" position, and the fire extinguishing system is in the automatic control state. When a fire occurs in the protection area, the fire detector sends out a fire signal, and the alarm controller immediately emits sound and light alarm signals. The control panel receives two independent fire alarm signals, issues a linkage command, and shuts down the linkage device. After a 30-second delay , Issued a fire extinguishing instruction, opened the solenoid valve to release the starting gas, the starting gas opened the fire extinguishing agent container valve through the starting pipeline to release the fire extinguishing agent, and implemented the fire extinguishing.

● (Electrical) manual control: Turn the control mode selection key on the control panel to the "manual" position, and the fire extinguishing system is in the manual control state. When a fire occurs in a protective area, you can press the start button on the manual control box or control panel to start the fire extinguishing system in accordance with the prescribed procedures to release the fire extinguishing agent and extinguish the fire. In the state of automatic control, (electrical) manual control can still be achieved.

● Mechanical emergency manual control: When a fire occurs in a protected area and the fire extinguishing controller cannot issue a fire extinguishing instruction, all personnel should be immediately notified to evacuate the scene, close the linkage equipment, and then pull out the safety sleeve on the solenoid valve and depress the round head Open the solenoid valve with the handle and release the starting gas, then the container valve can be opened to release the fire extinguishing agent and extinguish the fire. If at this time encounter the solenoid valve repair or start the cylinder to fill the starting gas or other reasons can not open the container valve, the mechanical emergency start handle on the fire extinguisher container valve should be pulled down to open the container valve, release the fire extinguishing agent, and implement the fire.

● When a fire alarm is issued, but it is found that the situation changes within the delay time, and it is not necessary to start the fire extinguishing system to extinguish the fire, you can press the emergency stop button on the manual control box or control panel to stop the fire control controller from issuing the fire extinguishing instruction. .

Basic parameters:

Model: QRR0.10 GW / SHS-C2

Rated dose: 0.10 (Kg)

Protected space: 0.8m3

Release time: ≤12s

Start-up method: hot start / self-start 

Product size: Φ100 * 100mm

Product net weight: 810 ± 10g

Installation Notes:

Applications 

       The miniature hot aerosol automatic fire extinguishing device is suitable for the battery compartment, substation, computer room, UPS system, cable trench, cable well and other places that are prone to fire hazards and are not suitable for water system fire suppression. Can save various types of A, B, C, D, E fires in industrial and civil buildings such as offices, production workshops, material warehouses, air-conditioning rooms, cable corridors, cable shafts, archives, underground hydraulic stations, communication base stations, etc. Fires and electrical fires. 

Environmental requirements 

(1) Temperature: -50 ℃ ~ + 90 ℃; 

(2) Humidity: ≤95%;

(3) Space: The protected area is closed or relatively closed.

Features

(1) Economical

       Hengshen miniature hot aerosol fire extinguishing device is small in size, reliable in startup, high in stability, and can clean early, clean, rapid, efficient and low-cost fires. It is currently an ideal environmental protection fire extinguishing system. The hot aerosol fire extinguishing gas is generated by a solid hot aerosol generating agent through a thermochemical oxidation-reduction reaction. The fire extinguishing gas agent is released into the protected area space, and the fire is extinguished in a completely submerged manner. The daily storage and use of hot aerosol fire extinguishing devices do not require pipe networks and high-pressure vessels, and there is no need to consider the regular inspection and leakage of pressure vessels, which can greatly save construction investment and reduce operating and maintenance costs.

(2) Security

       For mechanical and electrical equipment rooms, cable facilities, and other protective spaces, S-type hot aerosol fire extinguishing agents will not affect their equipment. As long as the hot aerosol fire extinguishing system is released, it can be timely ventilated and cleaned, which fully meets the needs of fire protection in the industrial field.

(3) Environmental protection

       The ozone depletion potential (ODP value) of the Hengshen miniature hot aerosol fire extinguishing device is 0, which has no damage to the ozone layer; its greenhouse effect potential value (GWP value) is 0, which will not produce a greenhouse effect and affect global temperature changes. Hot aerosol Fire extinguishing agent is a fire protection product that meets environmental protection requirements.

(4) Reliability

       Hengshen miniature hot aerosol fire extinguishing device is composed of initiator (electric initiator / fire detection wiring harness), hot aerosol generator and generator, feedback element and cooling shell and other components. There are no pneumatic components such as pressure vessels and pressure valves, which have a validity period. Long, maintenance-free and high reliability.

Basic parameters 

Model: QRR0.03GW / SHS-C1

Rated dose (kg): 0.03 (Kg)

Space Protection (m³): 0.2m³ 

Release time (s): ≤5s

Product Size (mm): 90 * 95 * 24mm

Net weight (g): 440 ± 10g

Product implementation standard: GA 499.1-2010 "Aerosol fire extinguishing system Part 1: Hot aerosol fire extinguishing device" 

Extinguishing agent storage period: 10 years

Installation diagram

Occasion

    The miniature hot aerosol automatic fire extinguishing device is suitable for the battery compartment, substation, computer room, UPS system, cable trench, cable well and other places that are prone to fire hazards and are not suitable for water system fire suppression. Can save various types of A, B, C, D, E fires in industrial and civil buildings such as offices, production workshops, material warehouses, air-conditioning rooms, cable corridors, cable shafts, archives, underground hydraulic stations, communication base stations, etc. Fires and electrical fires.

Environmental requirements

(1) Temperature: -50 ℃ ~ + 90 ℃;

(2) Humidity: ≤95%;

(3) Space: The protected area is closed or relatively closed.

Features

(1) Economical

    Hengshen miniature hot aerosol fire extinguishing device is small in size, reliable in startup, high in stability, and can clean early, clean, rapid, efficient and low-cost fires. It is currently an ideal environmental protection fire extinguishing system. The hot aerosol fire extinguishing gas is generated by a solid hot aerosol generating agent through a thermochemical oxidation-reduction reaction. The fire extinguishing gas agent is released into the protected area space, and the fire is extinguished in a completely submerged manner. The daily storage and use of hot aerosol fire extinguishing devices do not require pipe networks and high-pressure vessels, and there is no need to consider the regular inspection and leakage of pressure vessels, which can greatly save construction investment and reduce operating and maintenance costs.

(2) Security

    For mechanical and electrical equipment rooms, cable facilities, and other protective spaces, S-type hot aerosol fire extinguishing agents will not affect their equipment. As long as the hot aerosol fire extinguishing system is released, it can be timely ventilated and cleaned, which fully meets the needs of fire protection in the industrial field.

(3) Environmental protection

    The ozone depletion potential (ODP value) of the Hengshen miniature hot aerosol fire extinguishing device is 0, which has no damage to the ozone layer; its greenhouse effect potential value (GWP value) is 0, which will not produce a greenhouse effect and affect global temperature changes. Hot aerosol Fire extinguishing agent is a fire protection product that meets environmental protection requirements.

(4) Reliability

    Hengshen miniature hot aerosol fire extinguishing device is composed of initiator (electric initiator / fire detection wiring harness), hot aerosol generator and generator, feedback element and cooling shell and other components. There are no pneumatic components such as pressure vessels and pressure valves, which have a validity period. Long, maintenance-free and high reliability.

Product model: QRR10LW / S

Rated pharmaceutical filling: 10KG

Dimensions: 720 × 780 × 400mm

Single suggested protection space: 76.9m³

Device gas outlet temperature during working: ≤100 ℃

Device surface temperature during work: ≤33 ℃

Product model: QRR2.5GW / S QRR5GW / S

Rated pharmaceutical filling: 2.5KG 5KG

Dimensions: 330 × 600mm

Recommended space for a single unit: 19.3m³ 38.5m³

Device gas outlet temperature during work: ≤150 ℃

Device surface temperature during working: ≤93 ℃

  "Hengshen" low temperature S-type hot aerosol fire extinguishing device is a gas fire extinguishing product developed and designed according to the needs of the fire engineering field. Compared with other high pressure gas fire extinguishing systems, it has the characteristics of small space occupation and simple installation and construction. Because the fire extinguishing agent stored in the device and the storage form are solid, and the fire extinguishing device is not a pressure solvent, there is no need for maintenance procedures to regularly check the pressure, and there is no need to set up another pipe network and pressure cylinder storage room in the place of use. Excellent cost performance.

The device is a high-tech, low-carbon, energy-saving, and green product that fully meets the conditions stipulated in the International Montreal Agreement and international environmental protection principles. Characteristics.

     working principle

      The hot aerosol fire extinguishing device is connected to the fire control center through a control module. When the smoke detector or temperature detector in the protected area receives the fire alarm signal, the audible and visual alarm and the gas fire controller in the protected area will alarm; when the gas fire controller receives the smoke detector or temperature After the composite fire alarm signal from the detector, the sound and light alarm automatically adjusts. After a delay of 30s, the gas fire extinguishing controller outputs an electric start signal to the fire extinguishing device and automatically starts the fire extinguishing device. Alternatively, the fire extinguishing device can be manually started directly by manual emergency starting and stopping.

Fire detection by smoke and temperature detectors and transmission of fire signals to the controller

After 0-30s (adjustable delay), the white fox takes the internal aerosol fire extinguishing device to start

Extinguish fire extinguishing gas.

Basic parameters:

Model: QRR0.16 G / SHS-F3

Rated dose: 0.16 (Kg)

Protected space: 1.3m3

Release time: ≤7s

Product size: Φ76 * 135mm

Product net weight: 1100 ± 10g

Particularly applicable scope: wind turbines, power distribution cabinets, small precision instrument cabinets 

Applications 

       The miniature hot aerosol automatic fire extinguishing device is suitable for the battery compartment, substation, computer room, UPS system, cable trench, cable well and other places that are prone to fire hazards and are not suitable for water system fire suppression. Can save various types of A, B, C, D, E fires in industrial and civil buildings such as offices, production workshops, material warehouses, air-conditioning rooms, cable corridors, cable shafts, archives, underground hydraulic stations, communication base stations, etc. Fires and electrical fires. 

Environmental requirements

(1) Temperature: -50 ℃ ~ + 90 ℃;

(2) Humidity: ≤95%;

(3) Space: The protected area is closed or relatively closed.

Features

(1) Economical

       Hengshen miniature hot aerosol fire extinguishing device is small in size, reliable in startup, high in stability, and can clean early, clean, rapid, efficient and low-cost fires. It is currently an ideal environmental protection fire extinguishing system. The hot aerosol fire extinguishing gas is generated by a solid hot aerosol generating agent through a thermochemical oxidation-reduction reaction. The fire extinguishing gas agent is released into the protected area space, and the fire is extinguished in a completely submerged manner. The daily storage and use of hot aerosol fire extinguishing devices do not require pipe networks and high-pressure vessels, and there is no need to consider the regular inspection and leakage of pressure vessels, which can greatly save construction investment and reduce operating and maintenance costs.

(2) Security

       For mechanical and electrical equipment rooms, cable facilities, and other protective spaces, S-type hot aerosol fire extinguishing agents will not affect their equipment. As long as the hot aerosol fire extinguishing system is released, it can be timely ventilated and cleaned, which fully meets the needs of fire protection in the industrial field.

(3) Environmental protection

       The ozone depletion potential (ODP value) of the Hengshen miniature hot aerosol fire extinguishing device is 0, which has no damage to the ozone layer; its greenhouse effect potential value (GWP value) is 0, which will not produce a greenhouse effect and affect global temperature changes. Hot aerosol Fire extinguishing agent is a fire protection product that meets environmental protection requirements.

(4) Reliability

       Hengshen miniature hot aerosol fire extinguishing device is composed of initiator (electric initiator / fire detection wiring harness), hot aerosol generator and generator, feedback element and cooling shell and other components. There are no pneumatic components such as pressure vessels and pressure valves, which have a validity period. Long, maintenance-free and high reliability.

Basic parameters:

Model: QRR0.15 GW / SHS-C3

Rated dose: 0.15 (Kg)

Pharmacy storage limited period: 5-10 years

Protected space: 1.2m3

Release time: ≤20s

Product size: Φ100 * 175mm

Product net weight: 1600 ± 10g

Special application: wind power industry

Applications

The miniature hot aerosol automatic fire extinguishing device is suitable for the battery compartment, substation, computer room, UPS system, cable trench, cable well and other places that are prone to fire hazards and are not suitable for water system fire suppression. Can save various types of A, B, C, D, E fires in industrial and civil buildings such as offices, production workshops, material warehouses, air-conditioning rooms, cable corridors, cable shafts, archives, underground hydraulic stations, communication base stations, etc. Fires and electrical fires.

Environmental requirements

(1) Temperature: -50 ℃ ~ + 90 ℃;

(2) Humidity: ≤95%;

(3) Space: The protected area is closed or relatively closed.

Features

(1) Economical

Hengshen miniature hot aerosol fire extinguishing device is small in size, reliable in startup, high in stability, and can clean early, clean, rapid, efficient and low-cost fires. It is currently an ideal environmental protection fire extinguishing system. The hot aerosol fire extinguishing gas is generated by a solid hot aerosol generating agent through a thermochemical oxidation-reduction reaction. The fire extinguishing gas agent is released into the protected area space, and the fire is extinguished in a completely submerged manner. The daily storage and use of hot aerosol fire extinguishing devices do not require pipe networks and high-pressure vessels, and there is no need to consider the regular inspection and leakage of pressure vessels, which can greatly save construction investment and reduce operating and maintenance costs.

(2) Security

For mechanical and electrical equipment rooms, cable facilities, and other protective spaces, S-type hot aerosol fire extinguishing agents will not affect their equipment. As long as the hot aerosol fire extinguishing system is released, it can be timely ventilated and cleaned, which fully meets the needs of fire protection in the industrial field.

(3) Environmental protection

The ozone depletion potential (ODP value) of the Hengshen miniature hot aerosol fire extinguishing device is 0, which has no damage to the ozone layer; its greenhouse effect potential value (GWP value) is 0, which will not produce a greenhouse effect and affect global temperature changes. Hot aerosol Fire extinguishing agent is a fire protection product that meets environmental protection requirements.

(4) Reliability

Hengshen miniature hot aerosol fire extinguishing device is composed of initiator (electric initiator / fire detection wiring harness), hot aerosol generator and generator, feedback element and cooling shell and other components. There are no pneumatic components such as pressure vessels and pressure valves, which have a validity period. Long, maintenance-free and high reliability.

Previous: QRR 0.16GSHS

Next: QRR0.10GWSHS

Basic parameters: 

Model: QRR0.03GW / SHS-AR2 

Rated dose: 0.03 (Kg)

Protected space: 0.2m³ 

Release time: ≤4s

Start-up method: hot start / self-start 

Product size: 125.3 * 68 * 38mm

Product net weight: 240 ± 10g

Special application: new energy vehicles 

Installation diagram:

Installation Notes:

Environmental requirements 

(1) Temperature: -50 ℃ ~ + 90 ℃;

(2) Humidity: ≤95%;

(3) Space: The protected area is closed or relatively closed.

Features

(1) Economical

       Hengshen miniature hot aerosol fire extinguishing device is small in size, reliable in startup, high in stability, and can clean early, clean, rapid, efficient and low-cost fires. It is currently an ideal environmental protection fire extinguishing system. The hot aerosol fire extinguishing gas is generated by a solid hot aerosol generating agent through a thermochemical oxidation-reduction reaction. The fire extinguishing gas agent is released into the protected area space, and the fire is extinguished in a completely submerged manner. The daily storage and use of hot aerosol fire extinguishing devices do not require pipe networks and high-pressure vessels, and there is no need to consider the regular inspection and leakage of pressure vessels, which can greatly save construction investment and reduce operating and maintenance costs.

(2) Security

       For mechanical and electrical equipment rooms, cable facilities, and other protective spaces, S-type hot aerosol fire extinguishing agents will not affect their equipment. As long as the hot aerosol fire extinguishing system is released, it can be timely ventilated and cleaned, which fully meets the needs of fire protection in the industrial field.

(3) Environmental protection

       The ozone depletion potential (ODP value) of the Hengshen miniature hot aerosol fire extinguishing device is 0, which has no damage to the ozone layer; its greenhouse effect potential value (GWP value) is 0, which will not produce a greenhouse effect and affect global temperature changes. Hot aerosol Fire extinguishing agent is a fire protection product that meets environmental protection requirements.

(4) Reliability

       Hengshen miniature hot aerosol fire extinguishing device is composed of initiator (electric initiator / fire detection wiring harness), hot aerosol generator and generator, feedback element and cooling shell and other components. There are no pneumatic components such as pressure vessels and pressure valves, which have a validity period. Long, maintenance-free and high reliability.

Basic parameters:

Model: QRR0.01GW / SHS-C1

Rated dose: 0.01 (Kg)

Protected space: 0.06m³

Release time: ≤5s

Product size: 58 * 65 * 24mm

Product net weight: 170 ± 10g

Starting method and requirements: ① Hot self-starting; 175 ± 10 ℃; ② Electric starting: DC12 ~ 24V, 350mA

Product implementation standard: GA 499.1-2010 "Aerosol fire extinguishing system Part 1: Hot aerosol fire extinguishing device"

Extinguishing agent storage period: 10 years

Installation diagram:

Installation Notes:

Applications 

       Miniature hot aerosol automatic fire extinguishing device is suitable for battery compartments, substations, electronic computer rooms, UPS systems, cable trenches, cable wells and other places prone to fire hazards and unsuitable for water systems. Can save various types of A, B, C, D, E fires in industrial and civil buildings such as offices, production workshops, material warehouses, air-conditioning rooms, cable corridors, cable shafts, archives, underground hydraulic stations, communication base stations, etc. Fires and electrical fires. 

Environmental requirements 

(1) Temperature: -50 ℃ ~ + 90 ℃; 

(2) Humidity: ≤95%; 

(3) Space: The protected area is closed or relatively closed. 

Features

(1) Economical

       Hengshen miniature hot aerosol fire extinguishing device is small in size, reliable in startup, high in stability, and can clean early, clean, rapid, efficient and low-cost fires. It is currently an ideal environmental protection fire extinguishing system. The hot aerosol fire extinguishing gas is generated by a solid hot aerosol generating agent through a thermochemical oxidation-reduction reaction. The fire extinguishing gas agent is released into the protected area space, and the fire is extinguished in a completely submerged manner. The daily storage and use of hot aerosol fire extinguishing devices do not require pipe networks and high-pressure vessels, and there is no need to consider the regular inspection and leakage of pressure vessels, which can greatly save construction investment and reduce operating and maintenance costs.

(2) Security

       For mechanical and electrical equipment rooms, cable facilities, and other protective spaces, S-type hot aerosol fire extinguishing agents will not affect their equipment. As long as the hot aerosol fire extinguishing system is released, it can be timely ventilated and cleaned, which fully meets the needs of fire protection in the industrial field.

(3) Environmental protection

       The ozone depletion potential (ODP value) of the Hengshen miniature hot aerosol fire extinguishing device is 0, which has no damage to the ozone layer; its greenhouse effect potential value (GWP value) is 0, which will not produce a greenhouse effect and affect global temperature changes. Hot aerosol Fire extinguishing agent is a fire protection product that meets environmental protection requirements.

(4) Reliability

       Hengshen miniature hot aerosol fire extinguishing device is composed of initiator (electric initiator / fire detection wiring harness), hot aerosol generator and generator, feedback element and cooling shell and other components. There are no pneumatic components such as pressure vessels and pressure valves, which have a validity period. Long, maintenance-free and high reliability.

Basic parameters:

Model: QRR0.06 G / SHS-F3

Rated dose: 0.06 (Kg)

Protected space: 0.4m3

Release time: ≤5s

Start-up method: hot start / self-start 

Product size: Φ63 * 100mm

Product net weight: 580 ± 10g

Special application: wind power generator set, power distribution cabinet, small precision instrument cabinet

Installation Notes:

Applications 

       The miniature hot aerosol automatic fire extinguishing device is suitable for the battery compartment, substation, computer room, UPS system, cable trench, cable well and other places that are prone to fire hazards and are not suitable for water system fire suppression. Can save various types of A, B, C, D, E fires in industrial and civil buildings such as offices, production workshops, material warehouses, air-conditioning rooms, cable corridors, cable shafts, archives, underground hydraulic stations, communication base stations, etc. Fires and electrical fires. 

Environmental requirements 

(1) Temperature: -50 ℃ ~ + 90 ℃; 

(2) Humidity: ≤95%; 

(3) Space: The protected area is closed or relatively closed.

Features

(1) Economical

       Hengshen miniature hot aerosol fire extinguishing device is small in size, reliable in startup, high in stability, and can clean early, clean, rapid, efficient and low-cost fires. It is currently an ideal environmental protection fire extinguishing system. The hot aerosol fire extinguishing gas is generated by a solid hot aerosol generating agent through a thermochemical oxidation-reduction reaction. The fire extinguishing gas agent is released into the protected area space, and the fire is extinguished in a completely submerged manner. The daily storage and use of hot aerosol fire extinguishing devices do not require pipe networks and high-pressure vessels, and there is no need to consider the regular inspection and leakage of pressure vessels, which can greatly save construction investment and reduce operating and maintenance costs.

(2) Security

       For mechanical and electrical equipment rooms, cable facilities, and other protective spaces, S-type hot aerosol fire extinguishing agents will not affect their equipment. As long as the hot aerosol fire extinguishing system is released, it can be timely ventilated and cleaned, which fully meets the needs of fire protection in the industrial field.

(3) Environmental protection

       The ozone depletion potential (ODP value) of the Hengshen miniature hot aerosol fire extinguishing device is 0, which has no damage to the ozone layer; its greenhouse effect potential value (GWP value) is 0, which will not produce a greenhouse effect and affect global temperature changes. Hot aerosol Fire extinguishing agent is a fire protection product that meets environmental protection requirements.

(4) Reliability

       Hengshen miniature hot aerosol fire extinguishing device is composed of initiator (electric initiator / fire detection wiring harness), hot aerosol generator and generator, feedback element and cooling shell and other components. There are no pneumatic components such as pressure vessels and pressure valves, which have a validity period. Long, maintenance-free and high reliability.

Fire escape kit

① Fire escape mask Use: To filter toxic fumes, flame retardant insulation

② Multi-function flashlight safety hammer Use: emergency call signal for fire and power failure

③ Steel wire escape rope Use: Escape from high-rise buildings is an effective means of escape

④ Fire blanket Purpose: Extinguish the source of fire in the early stage

⑤ Miniature aerosol fire extinguishing device Use: Automatically extinguish small space fire sources 

Use place 

       Equipped in hotels, restaurants, office buildings, shopping malls, schools, kindergartens, hospitals, theaters, restaurants, apartment buildings, residential buildings and other places. It is an escape equipment in case of a sudden fire. The hood is made of flame-retardant and heat-insulating material. The eye window is arc-shaped and has a wider field of view. The curved surface of the nose and nose mask closely matches the face and face, and the air leakage coefficient is small. A special reflective material is used on the hood to enhance the ability to identify fire scenes. The canister can effectively protect toxic gases and fumes due to the combustion of various materials, and especially has a good protection function against CO (carbon monoxide) and HCN (hydrocyanic acid) and smoke chlorine. 

Instructions 

1. Open the closing lid and take out the vacuum packing bag.

2. Tear off the vacuum packaging bag and pull out the two cans inside and outside.

3. Put on the hood and tighten the headband.

4. Choose the path and decisively escape.

Precautions

1. Generally speaking, this mask can only be used once and only for personal use.

2. After the poison gas passes through the canister, the inhalation temperature will rise. This is normal. At this time, the respirator must not be removed.

3. Escape mask preservation environment: The ambient temperature should be 0 ℃ -40 ℃, ventilation should be good, no rain and moisture erosion.

4. It is best not to move the disposable escape mask after putting it in place, it is easy to damage and fail.

5. The oxygen content is too low to use, because the mask itself cannot generate oxygen, and the minimum oxygen concentration is 17%.

6. Generally speaking, it can only be used by adults. Children are too prone to accidents.

7. Once the vacuum package is torn, it can only be used at that time, and it cannot be stored again.

Use place 

       Equipped in hotels, restaurants, office buildings, shopping malls, schools, kindergartens, hospitals, theaters, restaurants, apartment buildings, residential buildings and other places. It is an escape equipment in case of a sudden fire. The hood is made of flame-retardant and heat-insulating material. The eye window is arc-shaped and has a wider field of view. The curved surface of the nose and nose mask closely matches the face and face, and the air leakage coefficient is small. A special reflective material is used on the hood to enhance the ability to identify fire scenes. The canister can effectively protect toxic gases and fumes due to the combustion of various materials, and especially has a good protection function against CO (carbon monoxide) and HCN (hydrocyanic acid) and smoke chlorine. 

Instructions 

1. Open the closing lid and take out the vacuum packing bag.

2. Tear off the vacuum packaging bag and pull out the two cans inside and outside.

3. Put on the hood and tighten the headband.

4. Choose the path and decisively escape.

Precautions

1. Generally speaking, this mask can only be used once and only for personal use.

2. After the poison gas passes through the canister, the inhalation temperature will rise. This is normal. At this time, the respirator must not be removed.

3. Escape mask preservation environment: The ambient temperature should be 0 ℃ -40 ℃, ventilation should be good, no rain and moisture erosion.

4. It is best not to move the disposable escape mask after putting it in place, it is easy to damage and fail.

5. The oxygen content is too low to use, because the mask itself cannot generate oxygen, and the minimum oxygen concentration is 17%.

6. Generally speaking, it can only be used by adults. Children are too prone to accidents.

7. Once the vacuum package is torn, it can only be used at that time, and it cannot be stored again.

       Fire escape rope is one of the important tools in fire escape, and it is often used in high-rise buildings. When evacuating the fire field, you can use the fire escape rope to quickly escape from the window when there is no way to escape, because the escape rope is generally used at high levels, which brings certain danger to the escapees. Learn how to use the fire escape rope to It is important to use the following fire escape rope.

       第一步：首先要找到坚固的固定物，将绳子打好结绑在固定物上（例如柱子、栏杆、窗户的边框等），要确定固定物是否牢固，这一步至关重要。

       第二步：系好安全带和8字环、挂扣相链接。将绳索从大孔伸出来，再把绳索绕过小环，打开主锁的钩门，将8字环的小环挂进主锁（如下图）。 

       第三步：检查并确认各个环节安全无误后，将逃生绳扔至窗户外，然后沿着墙面下降

消防逃生绳的使用方法步骤图：

       消防逃生绳使用饶性钢丝绳制作而成，不仅让其本身强度高，而且不易骤然整根折断。外层使用大化纤材编织而成，使外层紧密不脱落、不抽丝，让整条绳子更加牢固。消防逃生绳表面均增加了阻燃剂，使其在高温燃烧下不容易烧断，具有耐火、耐高温性。

微型气溶胶灭火装置 

安装说明：

product description

       Hot aerosol fire extinguishing gas generating agent is a solid chemical mixture composed of oxidant, reducing agent, burning rate control agent and binder. The storage form is solid, with stable chemical properties and non-volatile characteristics. There is no pressure vessel. Leakage of extinguishing gas. Fire extinguishing agent has the characteristics of long storage life and low environmental impact.

       The hot aerosol fire extinguishing device can release the fire extinguishing gas under high temperature and high humidity. The released gas is not conductive and corrosive, and will not cause any damage to the equipment. The site does not need special cleaning after fire extinguishing. Put into use. Because the fire extinguishing gas is non-toxic and harmless to the environment and will not cause harm to the human body, the hot aerosol fire extinguishing agent is currently the first new type of environmentally friendly fire extinguishing technology in the industry.

Technical Parameters

1) Product implementation standard: GA 499.1-2010 "Aerosol fire extinguishing system Part 1: Hot aerosol fire extinguishing device"

2) Validity period of fire extinguishing agent storage: 10 years

3) Operating environment: -50 ~ + 90 ℃, ambient humidity ≤95%

4) Main performance parameters of fire extinguishing device:

Rated dose: 0.02kg

Conventional fire protection space: 0.15 m³

Product net weight: 410 ± 10g

Starting method and requirements: ① Hot self-starting; 175 ± 10 ℃; ② Electric starting: DC12 ~ 24V, 350mA

Fire spraying time: ≤5s

Applicable places

       Miniature hot aerosol automatic fire extinguishing device is suitable for battery boxes / cabins, substations, electronic computer rooms, UPS systems, cable trenches, cable wells and other places prone to fire hazards and unsuitable for water systems. Can save various types of A, B, C, D, E fires in industrial and civil buildings such as offices, production workshops, material warehouses, air-conditioning rooms, cable corridors, cable shafts, archives, underground hydraulic stations, communication base stations, etc. Fire and electrical fire.

Environmental requirements 

(1) Temperature: -50 ℃ ~ + 90 ℃;

(2) Humidity: ≤95%;

(3) Space: The protected area is closed or relatively closed.

Features

(1) Economical

    Hengshen miniature hot aerosol fire extinguishing device is small in size, reliable in startup, high in stability, and can clean early, clean, rapid, efficient and low-cost fires. It is currently an ideal environmental protection fire extinguishing system. The hot aerosol fire extinguishing gas is generated by a solid hot aerosol generating agent through a thermochemical oxidation-reduction reaction. The fire extinguishing gas agent is released into the protected area space, and the fire is extinguished in a completely submerged manner. The daily storage and use of hot aerosol fire extinguishing devices do not require pipe networks and high-pressure vessels, and there is no need to consider the regular inspection and leakage of pressure vessels, which can greatly save construction investment and reduce operating and maintenance costs.

(2) Security

    For mechanical and electrical equipment rooms, cable facilities, and other protective spaces, S-type hot aerosol fire extinguishing agents will not affect their equipment. As long as the hot aerosol fire extinguishing system is released, it can be timely ventilated and cleaned, which fully meets the needs of fire protection in the industrial field.

(3) Environmental protection

    The ozone depletion potential (ODP value) of the Hengshen miniature hot aerosol fire extinguishing device is 0, which has no damage to the ozone layer; its greenhouse effect potential value (GWP value) is 0, which will not produce a greenhouse effect and affect global temperature changes. Hot aerosol Fire extinguishing agent is a fire protection product that meets environmental protection requirements.

(4) Reliability

    Hengshen miniature hot aerosol fire extinguishing device is composed of initiator (electric initiator / fire detection wiring harness), hot aerosol generator and generator, feedback element and cooling shell and other components. There are no pneumatic components such as pressure vessels and pressure valves, which have a validity period. Long, maintenance-free and high reliability.